C-R Series- M18 Cylindrical Type Optex
Best-in-class robust and powerful
IR LED types added
- Large sensing distance
- Full-metal housing in brass
- Easy to Align even the long distance
New C-R Series
Cylindrical photoelectric sensor with long-distance detection, robustness, and excellent usability.
The new C-R Series has much higher performance than conventional models, and is more easy-to-use.
This is a new generation photoelectric sensor with the high detection performance, cost performance ratio, and robustness that are required of cylindrical sensors.
Large Sensing Distance
Achieved 25m detection distance, the longest for through beam types! Meets the need for long-distance application.
High vibration resistance
Hotmelt molding enables high vibration resistance up to 100Hz, 8 hours. (For details, see Specification)
The C-R Series meets the conditions for the watertight IP67 rating.
Can be used on work sites or devices that are exposed to splashing water such as the food and beverage industry.
Full-metal Housing in Brass
In the conventional model, the tip and the end of the housing were made of plastic.
New C-R Series achieved the high robustness by full-metal housing.
Easy to Align even the long distance
Visible red LED
Red LED, which allows easy alignment, has been adopted for all models as the light source. The spot beam location is visible, reducing the time required for alignment.
In addition, spot beam flare is minimized, which improves the visibility when compared to conventional models.
Front Output Indicator is equipped on the receiver (Through beam type)
Output indicator is equipped not only on the side of the receiver, but also on the front. When panning the emitter for alignment, the ON/OFF state of the indicator is visible from the emitter side, so alignment can be performed more easily by a single operator.